Total Facility Solution
|
 |
|
 |
|
 |

-
Compatible to MS-9600 and MS-9600LS with DACT-UD, MS-9200UD, MS-9200UDLS, MS-9600UDLS, MS-9050UD, MS-5UD, MS-10UD, and any competitive panel using the 411 series
-
Transmits alarms/events over any IP network: Internet and intranet using customer shared equipment
- Supports contact ID over IP and does not require static IP address
- Plugs into Primary phone line on panel DACT
- Mounts in new Fire-Lite common enclosure or external enclosure
- UL 864 9th Edition listed to meet NFPA 72 OT (other transmission technologies), packet switched data network, PSDN
|
Internet Fire Communicator Introducing FIREWATCHTM IP Communicator, Fire-Lite's new Internet Fire Communicator. Designed to work with later-model Contact ID and DACT-equipped Fire-Lite fire panels, the IP Communicator sends information over any type of Ethernet network connection to a central station equipped with a compatible Teldat VisorALARM® IP receiver. The IP Communicator supervises the connection to the central station every 90 seconds, providing faster detection of a connection fault and saves the cost of dedicated redundant phone lines.
|
|
|
 |
MS-9050UD
- Single loop supports up to 50 addressable points of any type
- Integrated DACT for off-premises monitoring
- Built-in NAC synchronization for System Sensor, Wheelock, and Gentex devices
- Annunciator bus supports up to 8 devices, including new ANN-80 LCD Remote Annunciator, remote serial or parallel printer gateway, and LED graphic annunciator
- Auto programming feature quickly configures detectors and modules
- Competes with conventional systems, providing addressable point identification at similar price point
MS-9200UDLS
- USB programming port
- Uses PS-Tools programming utility
- Supports new lower cost annunciator or alternatively our legacy annunciator device
- Single SLC provides support for 198 addressable devices on twisted, unshielded fire wire
- New FAST LiteSpeed SLC communication polls10 devices at a time and operates on standard, unshielded wire
- Built-in digital communicator for off premises monitoring and remote up/download
- 4 NACs with built-in sync for System Sensor, Wheelock and Gentex
- 3 amp total shared power supply expandable to 6 amps of notification power with optional transformer
- Supports up to 32 optional LCD-80F or ACS LED annunciators
MS-9600LS/MS-9600UDLS
- Uses PS-Tools programming utility
- Supports new lower cost annunciator or alternatively our legacy annunciator device
- Up to 159 detectors and 159 control/monitor modules (total of 318 devices) per SLC (636 with SLC-2LS option card)
- New FAST LiteSpeed SLC communication polls 10 devices at a time and operates on standard, unshielded wire
- Autoprogrammable function reduces installation time
- Advanced Fire Technology includes sensitivity testing and automatic drift compensation
- New 7 Amp total shared power Switching Power Supply provides extra power to four Class B or two Class A Notification Appliance Circuits with onboard Sync Select for System Sensor®, Wheelock® or Gentex® devices
|
|
 |
|
|